FLYING PROBE TESTER FA1811

Description

Board dimensions

Square 10 mm (0.39 in) to Square 80 mm (3.15 in)

Supported range of board thicknesses for clamping

0.1 mm (0.004 in) to 5.0 mm (0.20 in)

Designed for each board

Board clamping

Holder, shutter, and vacuum pump required separately

Supported pad diameter

200 μm or larger, 300 μm or larger when using Kelvin probe

Max. number of pins

Meeting Ever Increasing Demands for Greater Analytical Power,
Faster Testing Speeds and Reduced Costs

Number of arms	2 (Upper: 2)
Mountable probes	CP1073 series
Measurement parameters and measurement ranges	Resistance measurement :	400.0 μΩ to 40.00 MΩ 4.000 Ω to 4.000 MΩ (T)
	Capacitance measurement :	100.0 fF to 10.00 μF
	MLCC measurement :	100.0 nF to 100.0 μF
	Insulation measurement :	1.000 kΩ to 100.0 GΩ 1.000 kΩ to 250.0 MΩ (T)
	Capacitor insulation measurement :	1.000 kΩ to 10.00 MΩ
	High-voltage resistance measurement :	1.000 kΩ to 100.0 GΩ 1.000 kΩ to 250.0 MΩ (T)
	Leak current measurement :	1.000 μA to 10.00 mA
	Continuity :	400 mΩ to 1.000 kΩ
	Open measurement :	4.000 Ω to 4.000 MΩ
	Short measurement :	400.0 mΩ to 40.00 kΩ
	(T): When measuring via the TEST FIXTURE
Judgment range	-99.9% to +999.9% or absolute value
Total probing precision	10 μm (Square)
Probing pitch	Min. 40 μm (when using CP1073-01)
Supported range of board thicknesses for clamping	Follow option on BGA side
Probing area	75 mm (2.95 in) × 75 mm (2.95 in)
Power supply	200 V AC ±10% (three phase) 50/60 Hz (200 V, 220 V AC: specified upon order) Maximum power consumption: 5 kVA
Dimensions and mass	1300 mm (51.18 in) W × 1670 mm (65.75 in) H × 1700 mm (66.93 in) D (Excluding protruding parts), 2000 kg (70,546.7 oz)