Description

Three Phase Inverter MIG/MAG Welding Machines

Series: Multi-MIG

Models: Multi-MIG 1611

As one of the leaders and having the best name in Middle East and West Asia for the quality, and regarding to many years experience in manufacturing of welding machines and exporting, now we are pleased to introduce a new line of Multi-Function Inverter welding machines. These machines are suitable for high quality MIG/MAG welding of Steels and Stainless steels and Aluminum wires. The Multi-MIG models are ideal for TIG DC process (Lift Arc) and MMA process too. Multi MIG series have been designed for hard condition in heavy duty industries specially hot climate. In addition, less energy consumption comparing to other machines in market and complying with international standards, insures longer life and safety.

Inverter MIG/MAG Welding Machines Model: Multi-MIG 1611

EXCELLENT FEATURES OF MACHINES

•  Ability to adjust the welding current and voltage continuously
• Stability of welding parameters even at input voltage fluctuations
• Electronic and continuous control of inductance, to ensure precise and stable welding
• 2 stroke / 4 stroke
• High duty cycle for heavy duty condition
• Ability of welding of non-ferrous metals and alloys
• Excellent welding for even thin metals
• Excellent arc striking and possibility of soft start
• Reduce weight and dimensions due to the use of advanced inverter technology
• Wire insertion button
• Control BURN BACK in order to prevent sticking the wire to contact tip or work piece.
• Ability to presetting welding voltage with display of real current and voltage during welding
• Advanced inverter technology using best quality switching device insures high reliability
• Excellent CV characteristic in MIG/MAG and CC in MMA/TIG
• Control of welding Parameters on panel
• Weld ability with various electrodes in MMA mode
• Ability of Voltage Reduction Device in TIG Mode.
• Indicator to show over heat fault on panel
• Strong chassis and motor insures reliability during feeding of wire
• Control of wire speed by feedback and brake
• Manufactured and tested according to the International Standards
•  3 years warranty

ACCESSORY

• Welding cable including earth clamp
• W4122S2 Wire feeder
• Water cooled or air cooled interconnection cable

OPTIONAL

• Electronic mask
• Air cooled Torch
• Water cooled torch
• Regulator and gas heater
• Wire feeder with speed more than 22 m/min
• Spool cove

TECHNICAL DATA

Multi–MIG 1611 

                                                                      MIG   MMA TIG

• Three Phase Input 50/60 HZ1 V                    400
• Input Power @I2max KVA                             25.2
• Fuse@I2max A                                              D 50
• Input Current @100%DT A               29.7/  30.2/25.3
• Mains Cable Cross Section mm2                  4 x 6
• Open Circuit Voltage V                                      70
• Current Range A                               50-450/  10-450
• Duty Cycle at( 40˚C) 100% A            400 / 390 / 420                                     
•                                     60% A           410 / 400 / 430 
•                                       x% A          450  / 450  / 450  
•                                                        (25%)(25%)(40%)
• Protection class IP                              IP21S
• Insulation class2 F                                 F
• Dimensions (L xW xH) Cm                96x50x78
• Weight of machine                                Kg 61